Alasan Mesin Pembuat Es Tidak Mengeluarkan Air
As a common refrigeration equipment, there may be multiple reasons for the problem of no water in the ice maker. Some small problems can be solved by oneself, but if they cannot be solved, it is necessary to seek the help of a repairman in time to avoid affecting normal use. The following are some possible reasons for the ice maker not producing water.
1. The water in the water tray is not enough or there is no water.
2. Gear reducer failure or problems with the reduction motor.
3. Ice blockage or system failure causing water flow obstruction.
The reduction motor is stuck or the gear reducer fails.
2. The system has excessive moisture, causing slight ice blockage.
3. The condensing system of the ice maker is blocked.
4. Insufficient refrigerant or leakage.
5. The evaporator is too dirty.
1. Low power supply voltage, need to check the power supply situation.
2. Burned contacts or poor contact.
3. Compressor intermittent operation due to system pressure protection.
4. Faulty compressor starter.
5. The condenser is too dirty, causing high pressure protection.
1. The water supply tray of the inlet valve has too much water.
2. The connecting water pipe is damaged.
3. The pipe clamp is malfunctioning.
四、制冰机漏水
1. 进水阀供水盘水量过大。
2. 连接水管存在破损。
3. 管箍出现故障。
4. Malfunction of water level float valve.
5. Wet ice cubes are not hard.
1. The ambient temperature is too high, especially in summer.
2. Too much refrigerant added to the repaired machine.
3. Excessive water supply in the ice tray of the ice maker.
4. Insufficient power of the compressor.
6. Excessive noise.
1. Faulty fan of the ice maker.
2. Faulty reducer.
3. Excessive noise from the compressor.
7. System failure during startup.
1. Phase sequence problem.
2. Power supply system failure.
3. Faulty control board.
8. Water shortage alarm.
1. Clogging of the water supply joint filter.
2. Clogging of the water supply pipe.
3. Clogging of the inlet valve.
4. Leakage of the drainage valve.
5. Malfunction of the water pump.