Analisis dan Solusi Masalah Mesin Pembuat Es di Toko Bubble Tea

The ice making machine in the milk tea shop may not make ice for various reasons. The following is a summary of the analysis of ice making machine malfunction:

The machine is running but no ice is produced.

1. Insufficient or no water in the water tray.

2. Gearbox failure or reducer motor failure.

3. System failure causing ice blockage, such as dirt blockage.

Reduction in ice production.

1. Capillary tube or expansion valve blockage.

2. Slight ice blockage caused by excessive moisture in the system.

3. Ice making machine condensing system blockage.

4. Insufficient refrigerant or leakage.

5. Evaporator is too dirty.

Intermittent operation of the compressor.

1. Low voltage, need to check the power supply situation.

2. Poor contact due to burnt contact points.

3. System pressure protection triggered.

4. Starter failure of the compressor.

5. Condenser is too dirty, triggering high pressure protection.

Water leakage from the ice making machine.

1. The water supply to the water tray is too large.

2. Damaged water connection pipe.

3. Faulty hose clamp.

4. Faulty water level float valve.

Soft ice cubes.

1. High ambient temperature, especially in summer.

2. Excessive refrigerant added to repaired machine.

3. Excessive water supply to the water tray of the ice making machine.

4. Insufficient compressor power.

Excessive noise.

1. Faulty fan of the ice making machine.

2. Gearbox failure.

3. Suara kompresor keras.

Menyalakan mesin melaporkan kerusakan sistem.

1. Masalah urutan fase.

2. Kerusakan sistem pasokan listrik.

3. Kerusakan papan kontrol.

Alarm kekurangan air.

1. Penyumbatan saringan konektor pasokan air.

2. Penyumbatan pipa pasokan air.

3. Penyumbatan katup masuk air.

4. Bocoran katup pembuangan air.

5. Kerusakan pompa air.

Jika mesin pembuat es di kedai bubble tea tidak mengeluarkan air, Anda dapat memeriksa dan memecahkan masalah dengan mengacu pada poin-poin di atas.